# Clearing & Resetting

***

The **\[CLEAR]** button allows to reset parameters to default, clear applied modulation, buffers, or entire tracks and scenes.

***

## Clear Parameter

You can quickly reset any parameter on the S4 to its default value using the **\[CLEAR]** button. This is especially helpful when you want to undo changes and return to a clean starting point.

1. Hold **\[CLEAR]** and then turn (or tap) the corresponding **PARAMETER encoder**
2. The parameter will instantly return to its default value

***

## Clear Buffer, Mods, Params, Device

* Navigate to any of the five devices in the **Device Chain**
* Hold **\[CLEAR]** to open available options

<figure><img src="https://662554179-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FHdBRp4PsMPb4tP3f8vi8%2Fuploads%2F32agY9oj8rtRq2d4krUn%2FClearParamter%20illustration.png?alt=media&#x26;token=75ac2961-53a1-482f-9358-a86f7c0b89e1" alt=""><figcaption></figcaption></figure>

| BUFFER                                            | MODS                                                  | PARAMS                                                       |
| ------------------------------------------------- | ----------------------------------------------------- | ------------------------------------------------------------ |
| Clears the sample buffer for the selected device. | Clears all modulation values for the selected device. | Clears all general parameter values for the selected device. |

***

## **Clear Track**

1. Open the Track View by tapping **\[TRACK]**
2. Hold **\[CLEAR]** and tap one of the four **\[ACTION] buttons**
3. The corresponding Track is cleared

***

## Clear Scene

1. Open the Scene View by tapping **\[SCENE]**
2. Use the **SELECT** encoder or the **\[ACTION] buttons** to highlight a **Scene**
3. Hold **\[CLEAR]** and tap **\[CLEAR]** to clear the **Scene**

***