# Config Options Reference

AUDIO

MAIN LEVEL-INF DB – 0 DB
INPUT
  • IN1/IN2
  • MIC
  • IN1/MIC
  • HEADSET
MIC GAIN0 – 100
TRACK 1-4 INPUT
  • STEREO
  • IN1
  • IN2
  • SENDS ONLY
MONITOR ON RECORD
  • ON
  • OFF

MIDI

CC CONTROL
  • ON
  • OFF
SYNC IN
  • ON
  • OFF
SYNC OUT
  • ON
  • OFF
START STOP
  • ON
  • OFF
PROGRAM CHANGE
  • ON
  • OFF
TRACK 1-4 MIDI CHANNEL1-16

METER

TRACK PLAY
  • NONE
  • 1/16
  • 1/8
  • 1/4
  • 1/2
  • 1 BAR
  • 2 BARS
  • 4 BARS
TRACK RECORD
  • NONE
  • 1/16
  • 1/8
  • 1/4
  • 1/2
  • 1 BAR
  • 2 BARS
  • 4 BARS
MAIN RECORD

  • NONE
  • 1/16
  • 1/8
  • 1/4
  • 1/2
  • 1 BAR
  • 2 BARS
  • 4 BARS
MODULATORS RUNNING
  • ALWAYS
  • WHEN PLAYING

SCENE

TRACK 1-4

KEEP SAMPLE
  • ON
  • OFF
KEEP PARAMS
  • ON
  • OFF

PERFORM

KNOB 1-8
TRIANGLE, SQUARE, HEX, CIRCLE

MISC

DISPLAY BRIGHTNESS1-13

SYSTEM

FIRMWARE VERSION
STORAGE
USB MASS STORAGE
INSTALL UPDATE
FACTORY RESET
EXPORT LOG
[^1]: Controls the main level of the S-4's output [^2]: Switch between different input options [^3]: Controls the gain of the internal microphone [^4]: Sets the input mode for the four tracks seperately [^5]: Controls whether or not MONITOR automatically enables when recording in DISC or TAPE [^6]: Enables/disables external CC control of the S-4's parameters [^7]: Enables MIDI sync in [^8]: Enables MIDI sync out [^9]: Enables starting and stopping on the S-4 on MIDI sync in [^10]: Enables/disable external control of the S-4 using program change [^11]: Sets the MIDI channel of the four tracks seperately [^12]: Sets Track Play quantization [^13]: Sets record quantization on tracks [^14]: Sets quantization of main record [^15]: Sets modulator behaviour when the S-4 is starting/stopping [^16]: Keeps sample in specific track on scene change [^17]: Keeps parameter values in specific track on scene change [^18]: Rename encoder macros [^19]: Rename action button macros [^20]: Sets the brightness of the display [^21]: Indicates the firmware version currently installed on the S-4 [^22]: Indicates used storage [^23]: Enter USB Mass Storage mode [^24]: Install firmware update [^25]: Completely reset the S-4 [^26]: Exports log file