MIDI Config

Track MIDI Channel

To communicate between the two connected devices the MIDI channel must be set to the same channel on each. Check with the manufacturers documentation for any external device MIDI configuration. Each track of the S4 can be configured to receive MIDI on its own individual channel.

Adjusting the Track MIDI Channel

1. Connect a device using USB or MIDI ports

2. Tap [CONFIG] to open the Config menu

3. Navigate to the MIDI menu and open it

4. Navigate to highlight the TRACK MIDI CHANNEL

MIDI CC Control

Parameters on the S4 can be controlled using external gear. MIDI CC messages are mapped from values 0-127 to the range of the parameter. All parameters are assigned to a specific MIDI CC number according to the . CC Control can be enabled or disabled in the Config menu.

1. Tap [CONFIG] to open the Config menu

2. Navigate to the MIDI menu and open it

3. Highlight the CC CONTROL option

4. Tap [SELECT] to toggle CC Control on or off

MIDI Synchronization

The S4 can be synchronized to an external MIDI Clock or it can synchronize other gear.

1. Tap [CONFIG] to open the Config menu

2. Navigate to the MIDI menu and open it

3. Highlight SYNC IN, SYNC OUT or START STOP

4. Tap [SELECT] to toggle the highlighted option on or off

Program Change

Scenes can be launched using program change. A setting is availble in the Config menu to enable or disable Program Change on the S4.

1. Select [CONFIG] and go to the MIDI menu

2. Select the PROGRAM CHANGE menu entry

3. Tap the [SELECT] encoder to toggle program change