Skip to main content

Clearing & Resetting

The [CLEAR] button allows to reset parameters to default, clear applied modulation, buffers, or entire tracks and scenes.

Clear Parameter​

You can quickly reset any parameter on the S4 to its default value using the [CLEAR] button. This is especially helpful when you want to undo changes and return to a clean starting point.

  1. Hold [CLEAR] and then turn (or tap) the corresponding PARAMETER encoder
  2. The parameter will instantly return to its default value

Clear Buffer, Mods, Params, Device​

  • Navigate to any of the five devices in the Device Chain
  • Hold [CLEAR] to open available options
ButtonNamingDescription
[TRIANGLE]BUFFERClears the sample buffer for the selected device.
[CIRCLE]MODSClears all modulation values for the selected device.
[HEXAGON]PARAMSClears all parameter values for the selected devices.
While recording the main output, an indicator in the header will show the duration of the recording.While recording the main output, an indicator in the header will show the duration of the recording.

Clear Track​

  1. Open the Track View by tapping [TRACK]
  2. Hold [CLEAR] and tap one of the four [ACTION] buttons
  3. The corresponding Track is cleared

Clear Scene​

  1. Open the Scene View by tapping [SCENE]
  2. Use the SELECT encoder or the [ACTION] buttons to highlight a Scene
  3. Hold [CLEAR] and tap [CLEAR] to clear the Scene